Causes pedestrians to go to the specified location and wait there for a specified period of time.
Location can be defined by a target line, a polygonal node, a rectangular node, or a point with given coordinates. If the location is a node, you can specify exact waiting points inside it using attractors. Attractors are locations within the area, which will attract pedestrians during their stay.
Pedestrians can wait for some specified amount of time, calculated from different events (e.g. reaching the waiting point, entering the area, or even manually), or until the user manual calls the block function free().
Demo model: Pedestrian Attractors Open the model page in AnyLogic Cloud. There you can run the model or download it (by clicking Model source files).- Waiting location
-
Here you choose whether you define the place where pedestrians wait with a line, point, or node.
Syntax: PedConstants.LocationType locationType
Valid values:
PedConstants.LocationType.NODE
PedConstants.LocationType.LINE
PedConstants.LocationType.POINT -
[Visible if Waiting location is node]
Polygonal node or rectangular node, where pedestrians will wait.Value type: AreaNode
Local variable: ped — the pedestrian -
[Visible if Waiting location is line]
Target line, where pedestrians will wait.Value type: TargetLine
Local variable: ped — the pedestrian -
[Visible if Waiting location is point (x,y)]
X (Y) coordinate of the point where pedestrians will wait.Value type: double
Local variable: ped — the pedestrian - Attractor choice
-
[Visible if Waiting location is node]
Here you can select the attractor the pedestrians will go to while waiting inside the area: none, random, free. If you select custom attractor, you can specify it in the Attractor parameter below.Syntax: PedConstants.AttractorChoice attractorChoice
Valid values:
PedConstants.AttractorChoice.NONE
PedConstants.AttractorChoice.RANDOM
PedConstants.AttractorChoice.FREE
PedConstants.AttractorChoice.CUSTOM -
[Visible if Use attractors is selected]
Attractor — location, which will attract pedestrians while they will wait inside the area.Value type: Attractor
Local variables:
ped — the pedestrian
AreaNode areaNode — the area - Stop delay after
-
Defines whether pedestrians will wait in area for some specified amount of time (Delay time option), or they will wait until the user calls free() function (Free() call option).
Syntax: PedConstants.DelayType delayType
Valid values:
PedConstants.DelayType.TIMEOUT — Delay time
PedConstants.DelayType.MANUAL — Free() call -
[Visible if Stop delay after Delay time]
Expression evaluated to obtain the waiting time for the pedestrian.Value type: double
Local variable: ped — the pedestrian - Delay starts when
-
[Visible if Type is set to Delay]
Defines, when waiting time starts. The following options are available:Ped enters the block — waiting time starts when pedestrian enters the PedWait block;
Ped stops at the point — waiting time starts when pedestrian stops at the point of the specified waiting location;
User calls activate() function — waiting time starts when user calls activate() function.Syntax: PedConstants.DelayStartsWhen delayStartsWhen
Valid values:
PedConstants.DelayStartsWhen.SINCE_ENTER_BLOCK
PedConstants.DelayStartsWhen.SINCE_BEGIN_WAIT
PedConstants.DelayStartsWhen.SINCE_MANUAL_CALL - Group members leave together
-
[Visible if Stop delay after: Delay time]
If selected, then upon finishing the waiting the pedestrian will remain in the waiting area until the rest of his group is free and they will leave the block together. Otherwise, the pedestrian will leave the block alone. You can also initiate the pedestrian leaving the block alone in any case by the call of the free() function.Syntax: boolean waitForGroup
Set new value at runtime: set_waitForGroup(new value) - Maximum capacity
-
If the checkbox is selected (true), you can limit the number of pedestrians waiting inside the block at the same time.
Syntax: boolean maximumCapacity
Set new value at runtime: set_maximumCapacity(new value) - Capacity
-
[Visible if Maximum capacity is selected]
The maximum number of pedestrians that can wait inside the block at the same time.Syntax: int capacity
Set new value at runtime: set_capacity(new value)
- Reach tolerance
-
Defines range, at which pedestrian should enclose to the waiting location to begin waiting. In case of groups, this applies only to the leader of the group.
Syntax: double targetReachTolerance
Set new value at runtime: 0,25 meters
- On enter
-
Code executed when the pedestrian enters the block.
Local variable: ped — the pedestrian
- On begin wait
-
Code executed when the pedestrian starts waiting.
Local variable: ped — the pedestrian
- On exit
-
Code executed when the pedestrian exits the block via out port (in the normal way).
Local variable: ped — the pedestrian
- On cancel
-
Code executed when the pedestrian exits the block via ccl port.
Local variable: ped — the pedestrian
- On remove
-
Code executed when a pedestrian is intentionally removed from this block by calling the block's function remove().
Local variable: ped — the pedestrian
| Function | Description |
|---|---|
| long countPeds() | Returns total number of pedestrians passed through this block. |
| Attractor getRandomAttractor(AreaNode areaNode) | Returns the random attractor inside the specified area. |
| Attractor getFreeAttractor(AreaNode areaNode) | Returns the free attractor inside the specified area. |
| void free(Agent ped) |
Interrupts command for the specified pedestrian and causes it to exit through the out port. On exit callback is called for each pedestrian leaving the block. |
| void freeAll() |
Interrupts command for all pedestrians in the block and causes them to exit through the out port. On exit callback is called for each pedestrian leaving the block. |
| void freeAllWaitingPeds() |
In case of individual pedestrians, this function interrupts command for pedestrians who have already reached the specified area and are currently in the state of waiting. In case of groups, the command called for a single member of the group will be applied to all other members of the group even if they haven’t reached the specified area yet. The pedestrians exit through the out port. On exit callback is called for each pedestrian leaving the block. |
| void cancel(Agent ped) |
Interrupts command for the specified pedestrian and causes it to exit through the ccl port. On cancel callback is called for each pedestrian leaving the block. |
| void cancelAll() |
Interrupts command for all pedestrians and causes them to exit through the ccl port. On cancel callback is called for each pedestrian leaving the block. |
| void activate(Agent ped) | Causes delay timer to start for the specified pedestrian. Available only if Delay starts when: User calls activate() function. |
| int size() | Returns the number of pedestrians in this block. |
| boolean contains(Agent ped) | Returns true if pedestrian is inside the block. |
| Set<Agent> getPeds() | Returns a non-modifiable collection of pedestrians currently located in this block. |
- in
-
The input port.
- out
-
The output port for pedestrians leaving the block “normally” after the successful completion of the command.
- ccl
-
The output port for pedestrians leaving the block because of “cancel” event (caused by a call of either cancel or cancelAll function).
-
How can we improve this article?
-